PushPac-Accessories

Adapters are required for coupling flexible rubber or flexible metal piping. An exclusive Seedcuff™ version for metal flex provides a smoother transition for gentler material handling.

• Available with Male or Female Camlock Coupler.

• Available as Stub or Seedcuff only without coupler.

		1 Bin Cyclone 3 30 degree Elbow 4 60 degree Elbow 5 90 degree Elbow	6 Straight Pipe 7 Compression Couplers 8 Bin Brackets 9 Adapter w/Camlock Coupler 10 90 degree Elbow and Flex

Camlock couplers connect in seconds without separate clamps or bolts. Proper pipe alignment and a good vacuum or pressure seal is assured.

When used with galvanized or stainless steel flex pipe, camlock couplers ensure the correct direction of bulk material flow, improving your vac's performance and minimizing pipe wear.

Camlock couplers typically are reusable if your flex requires replacement. Reinstall the used camlock couplers on your new flex pipe and you're set.

Camlock couplers can be used on all makes and models of pneumatic conveyors - just contact us to quote a retrofit!

Use compression couplers to butt-connect straight pipe or stubs. They are commonly used for bin and silo plumbing installations and are available in virtually any diameter. Compression couplers feature a heavy rubber gasket, steel inner sleeve and bolted compression for solid connections

The quick clamp with J-hook quickly and securely connects 1" or 1-1/4" angle-flanged piping. Many older vacs use flanged steel pipes, especially in diameters of 8" or greater.

Quick-On couplers are very handy for pipe connections requiring frequent access or disconnection.

Featuring an integral hand tightening screw, quick-on couplers can be installed without tools. Each coupler comes standard with a gasket.

Use heavy-duty aluminum pipe that is lightweight yet strong and lasts. Available with camlock couplers for fast and easy pipe connection.

4"=.072" Wall Thickness, 5"=.078" Wall Thickness, 6"=.083" Wall Thickness

Flex Pipe Guide
Tip! Extend the life of your flex - rotate 90° frequently.	Flex Only	Flex + Carbon Steel Ends	Flex + Carbon Steel Ends + Swivel

Flex + Carbon Steel Ends + Camlock Couplers	Flex + Carbon Steel Ends + Reducer + Camlock Couplers	Flex + Carbon Steel Ends + Swivel + Camlock Couplers	Flex + Carbon Steel Ends + Swivel + Reducer + Camlock Couplers

Constructed of hot dipped galvanized carbon steel strip for greater protection from weathering, this .019" thick galvanized flex pipe stands up in tough conveying environments. Its high-temperature packing virtually eliminates air leaks and provides the high capacities.

Constructed of hot dipped galvanized carbon steel strip and lined with 302 stainless steel, this flex measures .038" thick. It is designed to withstand the most grueling applications. It features high-temperature packing and an Easyflo™ smooth bore to minimize grain damage and reduce conveying friction. Also yields higher capacities, greater pipe strength and a longer service life.

Tackle your toughest applications with the most flexible and easy to handle metal flex. Constructed entirely of 302 stainless steel, this flex is contamination and corrosion resistant. More durable than galvanized flex pipe, its high-temperature packing virtually eliminates air leaks and provides optimum performance.

A compound rubber flex formulated to dissipate static electricity and constructed with a rigid PVC helix. The standard rubber flex is lighter and more flexible, making it best suited for clean-up applications. When durability and service life is of primary concern, the heavy-duty rubber flex is recommended.

Use heavy duty rubber flex when you need flexibility but require longer service life. Formulated to dissipate static electricity and constructed with a rigid PVC helix.

Use with compression couplers to butt-connect to straight pipe, another elbow or stubs. Also available with camlock couplers attached.

Elbows are commonly used for bin and silo plumbing installations. All elbows are steel grit blasted, primed, and painted.

Available in 15, 30, 45 ,60 and 90 degree bends.

Contact us about recommended piping packages for your application. Our experienced staff will guide you through a piping selection process that best fits your needs.

Carbon steel reducers provide a smooth transition between two different pipe diameters. Available in numerous configurations with or without camlock couplers attached.

Specifications, drawings, photographs, and design are for illustrative purposes only and are subject to change without notice. Also refer to the Legal section of this web site for more information.